DESCRIPTION: Surface mount interior ceiling light with clear polycarbonate lens and on/off switch
FEATURES: Features snap-on lens and easy to change bulbs
DURABILITY: All weather molded plastic housing and durable lens protects against corrosion
DESIGN: Contemporary styling
CSA APPROVED. Available in standard, or with a jack.
Warranty Information
Lumitronics warrants its lights and accessories to be in working order and corrosion-free during normal use for as long as the original consumer purchaser owns the product. If the product should have issues during normal use, Lumitronics will, free of charge, mail to the purchaser the replacement part necessary to put the product in good working condition. This warranty applies only to Lumitronics products installed in the United States of America, Canada or Mexico (North America).
Lumitronics also warrants all other aspects of the lights or accessories to be free of defects in material and workmanship during normal usage in a recreational vehicle for as long as the original consumer purchaser owns his or her Lumitronics product. All Lumitronics products are warranted for (1) year. If a defect is found during normal use, Lumitronics will, at its election, repair, provide a replacement part or product, or make appropriate adjustment. Damage to a product caused by accident, misuse, or abuse is not covered by this warranty. Improper care and cleaning will void the warranty. Proof of purchase (original sales receipt) must be provided to Lumitronics with all warranty claims. Lumitronics is not responsible for labor charges, installation, or other incidental or consequential costs. In no event shall the liability of Lumitronics exceed the purchase price of the product.
If you believe that you have a warranty claim, contact Lumitronics through our online contact form or send an email to info.lumitronics.store. Please be sure to provide all pertinent information regarding your claim, including a complete description of the problem, the product, model number, color, the date the product was purchased and from whom the product was purchased. Also include your original invoice. If you don't have an original invoice, a photo of your product showing our brand markings is required.
LUMITRONICS AND/OR SELLER DISCLAIM ANY LIABILITY FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Some states/provinces do not allow limitations of how long an implied warranty lasts or the exclusion or limitation of such damages, so these limitations and exclusions may not apply to you. This warranty gives the consumer specific legal rights. You may also have other rights that vary from state/province to state/province.
Hate products without instructions.. lens will not come off.. tempted to break them and then return... found instructions online but still no good..I went out to the warehouse and pulled an RV Euro Style Interior Single Ceiling Light with Built-In Switch, RVIL21, to determine how the lens is removed. There are 4 tabs, 1 at each corner, that hold the lens onto the base. You will want to squeeze in on the sides of the lens and pull back at the same time in the direction away from the switch. The lens will slide back allowing the tabs to clear the base and the lens can be removed giving you access to the bulb. I found the best place to grip it is just above the holes (where the tabs/feet will come out) just slightly behind the first set of feet closest to the switch.To replace the lens, make sure all 4 feet are seated in the holes and push back, towards the switch. The lens will then snap into place. I do not recommend using a knife, screwdriver, or any other tool as it could produce too much torque and damage the light.expert reply by: Michael H
5
Five Stars
Posted by Joe on Sep 21st 2017
works Great!
2
No instructions.. lens cover will not come off
Posted by Adam on Sep 21st 2017
Hate products without instructions.. lens will not come off.. tempted to break them and then return... found instructions online but still no good..I went out to the warehouse and pulled an RV Euro Style Interior Single Ceiling Light with Built-In Switch, RVIL21, to determine how the lens is removed. There are 4 tabs, 1 at each corner, that hold the lens onto the base. You will want to squeeze in on the sides of the lens and pull back at the same time in the direction away from the switch. The lens will slide back allowing the tabs to clear the base and the lens can be removed giving you access to the bulb. I found the best place to grip it is just above the holes (where the tabs/feet will come out) just slightly behind the first set of feet closest to the switch.To replace the lens, make sure all 4 feet are seated in the holes and push back, towards the switch. The lens will then snap into place. I do not recommend using a knife, screwdriver, or any other tool as it could produce too much torque and damage the light.expert reply by: Michael H
5
Five Stars
Posted by Joe on Sep 21st 2017
works Great!
5
Five Stars
Posted by Joe on Sep 16th 2017
works Great.
4
Good, but.
Posted by Jim Blanton on Sep 14th 2017
Excellent brightness, but cannot switch on one side only. Most ceiling lights like this have a two position on rocker. The photo looks like you can switch on one or two sides.
5
Five Stars
Posted by Brad on Sep 14th 2017
The price was a steal and the light is super bright, fantastic!