DESCRIPTION: License plate light with grey coated plastic housing
INSTALLATION: Mounting ears for surface mount. Mounts on 3.25
DESIGN: Single wire design grounds through mounting hardware
INCLUDED: Gasket for weather-tight seal. Replaceable bulb
DIMS: 4
Warranty Information
Lumitronics warrants its lights and accessories to be in working order and corrosion-free during normal use for as long as the original consumer purchaser owns the product. If the product should have issues during normal use, Lumitronics will, free of charge, mail to the purchaser the replacement part necessary to put the product in good working condition. This warranty applies only to Lumitronics products installed in the United States of America, Canada or Mexico (North America).
Lumitronics also warrants all other aspects of the lights or accessories to be free of defects in material and workmanship during normal usage in a recreational vehicle for as long as the original consumer purchaser owns his or her Lumitronics product. All Lumitronics products are warranted for (1) year. If a defect is found during normal use, Lumitronics will, at its election, repair, provide a replacement part or product, or make appropriate adjustment. Damage to a product caused by accident, misuse, or abuse is not covered by this warranty. Improper care and cleaning will void the warranty. Proof of purchase (original sales receipt) must be provided to Lumitronics with all warranty claims. Lumitronics is not responsible for labor charges, installation, or other incidental or consequential costs. In no event shall the liability of Lumitronics exceed the purchase price of the product.
If you believe that you have a warranty claim, contact Lumitronics through our online contact form or send an email to info.lumitronics.store. Please be sure to provide all pertinent information regarding your claim, including a complete description of the problem, the product, model number, color, the date the product was purchased and from whom the product was purchased. Also include your original invoice. If you don't have an original invoice, a photo of your product showing our brand markings is required.
LUMITRONICS AND/OR SELLER DISCLAIM ANY LIABILITY FOR SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
Some states/provinces do not allow limitations of how long an implied warranty lasts or the exclusion or limitation of such damages, so these limitations and exclusions may not apply to you. This warranty gives the consumer specific legal rights. You may also have other rights that vary from state/province to state/province.
Just as advertised fit perfectly and no installation problems. It was an exact duplicate of the one that broke on my Haulmark trailer. I am extremely pleased!
5
Five Stars
Posted by Kevin on Oct 16th 2016
Product came as ordered, works great
4
Four Stars
Posted by Geoff on Aug 1st 2016
Could be brighter.
5
perfect. Fast shipping and great service
Posted by Lonnie W on Jul 21st 2016
This lamp was a direct replacement of my broken one. perfect. Fast shipping and great service.
5
Fairly easy install
Posted by Stream Whipper on May 12th 2016
Yeah, it lights the licence plate
2
Poor design for two reasons: Cover screw contacts bulb, and bulb cannot be removed.
Posted by anthony on May 5th 2016
I recently purchased this Lumitronics license plate light to replace the original on a Haulmark cargo trailer. I chose this light because it has one wire (positive supply) and the ground is achieved through the fasteners that hold it to the trailer. This is the way the original light was configured so it would be an easy install. Most of other similar lights I found used two wires (one for positive supply and one for ground).I did notice that the bulb looked slightly crooked in the photo of the light, but didn't really think much of it at first...When I got the light, I removed the screw that holds on the top of the bulb cover so that I could see what type of bulb it was and thus order a spare bulb to keep as a spare. That's when I discovered why the bulb looks crooked (it was also crooked on the one I received). The reason is that unless you cock the bulb off to one side (by slightly pulling it out of its socket) the screw that holds the cover on will pierce the bulb (or at least rub against it). Hmm... okay.Then I found that you can't actually remove the bulb (!) because it hits the metal case (the fixture advertises that it has a replaceable bulb). In order to remove the bulb on the one I received, you would have to drill out the rivet on the bulb holder, remove the bulb, replace the bulb, then re-rivet the bulb holder. I carry spare bulbs, but not spare rivets, drills, and a rivet gun (at least not just to change a light bulb). For that reason, I sent it back.Instead, I'll be buying one of the LED versions that have two wires. If I'm going to have to break out the tools anyway, I might as well put the effort into improving the trailer. I'll make an access point to the backside so I can utilize the separate ground wire on one of the two-wire lights (ring terminal on the frame).For that reason I gave the light two stars. (I sent it back without installing it on the trailer so this is more about the design than whether it works or not.) Don't know if it was just mine or if they are all like that (although I do note the bulb looks a bit cocked over in the photograph as well).
5
Five Stars
Posted by Brian S on May 4th 2016
It replaced the broken light and lens on my trailer.
5
Easy install.
Posted by sam on Apr 29th 2016
Just what was needed for a trailer in need of some TLC. Easy install.
4
Good product.
Posted by Don on Mar 20th 2016
Did what I wanted it to do, and a fair price. Prompt shipment. Actually, just wanted parts of it to replace broken unit already installed.
