Surface Mount Porch Scare Light w/ Mounting Gasket - Stainless Steel Base

Surface Mount Porch Scare Light with Mounting Gasket - Stainless Steel Base

LED
$21.99
Sale price  $21.99 Regular price 
Skip to product information
Surface Mount Porch Scare Light w/ Mounting Gasket - Stainless Steel Base

Surface Mount Porch Scare Light with Mounting Gasket - Stainless Steel Base

$21.99
Sale price  $21.99 Regular price 

Free shipping over $25 - 30-day returns

Bulb Type

Surface-mount porch/scare light with a stainless steel base — corrosion-resistant for the long haul. Floods an entry, awning, or storage compartment with bright white light. Available in LED or incandescent.

Surface-mount means no cutout — two screws into the wall and 12V power. Stainless base shrugs off salt, road spray, and pressure-washer abuse. Many installers run these in pairs flanking the entry door.

Specs

  • Voltage: 12V DC
  • Lens: Clear, replaceable
  • Housing: Stainless steel base, UV-stabilized lens
  • Mounting: Surface-mount, 2-screw with gasket
  • Light source: LED (LUM-ICL51L) or incandescent (LUM-ICL51)

Variants

  • LED (LUM-ICL51L): Lower draw, longer life
  • Incandescent (LUM-ICL51): OEM-equivalent, lower upfront cost

What's in the box

  • Light fixture with bulb installed
  • Mounting screws and gasket

Fits

Any RV, camper, trailer, or 5th wheel with a flat exterior mounting surface and 12V wiring.

Install

Mark the holes, drill pilots, seat the gasket, run 12V, screw it down. Five to ten minutes.

You may also like

  • 5 stars: 128 (60%)
  • 4 stars: 31 (15%)
  • 3 stars: 17 (8%)
  • 2 stars: 20 (9%)
  • 1 star: 16 (8%)
G
Georgie A.
great light

excellent light , fit right in, perfect amount of light, I like it a lot!

O
ODHill
Perfect Replacement of Originals

Perfect fit for replacing the original ones on our 2005 Class A motorhome, even the screw holes lined up. the gasket that goes between the back of the fixture and the body of the motorhome is good quality but doesn't come pre-punched, so having a means to do that is helpful. Trying to run the screw through it would probably work but past experience with this type of gasket material has been that the screw grabs the gasket and wants to twist, so pre-punching makes sure the gasket lays flat for a good seal. I laid the fixture on the gasket and then market the holes with a silver sharpie, then punch it with the smallest hole punch in my set and it worked perfectly.

Z
Zack
Not their fault

If running RV power, its probably great, but im running a house breaker box in my camper after rebuilding it from the ground up, it blew as soon as i plugged it in, so i fixed it with a led house bulb and wired it up.

O
Osmel
I won't buy it again.

The light emitted is not white light. Installing two of these units inside the compartment of one of my trucks results in insufficient lighting, characterized by a very low light intensity.

D
Dale R.W.
RV lighting

Perfect fit

M
Mark H.
Awesome light

Looks good better then original

E
ElPadre
Huge light

This light is Huge, it should light the night sky.

D
David L.R.
👍

👍

d
dlgrif1
Good light, bad gasket

Good light bad gasket. Gasket had come off light and twisted. Could not get it to flatten so used gray rubber gasket tape like was on original.

R
Reo7
Light

Light work for my camper.

A
Al K.
Not a flush mounted light as described on the product description.

I purchased this last year, so it is out of the return window, so the best I can do is to warn others about this (I finally went to put this onto the camper). The description shows this as a flat mounted light to go onto the side of the camper. However, the flange is about a half inch from the back of the light, so it would not sit flush on the wall.I now need to purchase another one, and seal off the old wire hole in case it rains until the new one comes in.

H
Howard K.
A Lot of Light

Used as porch light on our camper. So much more light than the little original light.

C
Carl J.
It is an exact copy of original except this one is LED

perfect fit to original

O
Oregon C.E.
NOT BRIGHT AT ALL

Very dim.. It says LED.. but I think my bulb one was brighter!! Only switched to LED cause I ain't gotta change bulbs as often and I expected way brighter. Giving 2 stars as pictured are NOT accurate in the description.

M
Mark C.
Nice Lights

Great Product for a Great Price, along with Fast shipping. A+++

J
Joe P.
Fit perfect

For my 2003 Dutch Star perfectly. Easy to install .

P
Paul G.
Light output was too dim

Since the light output was too dim, I put the original brighter bulb into the new fixture

R
Reb G.
Worked great.

Fit like the old one

R
R. R.
Looks nice

This looks and works as good as factory. Easy to install.

J
J. C.
Back is no flat it need to be insert

Make sure we're you are installing it have a cut out for the insertion otherwise it will no seat flush my rv only have small hole for the wires and the back of the light need to be flat in order to fit

L
LLB
Ad says "Type: Surface mount scare light", but it's actually recessed 5/8". Not as advertised.

I bought what one of these last year when I did some roof maintenance on our 2000 Montana 5th wheel. It took about 15 minutes to install. Fast and easy. I decided to replace the old one on the opposite side that had mold inside and the lens was cracked. I pulled the old one off with no trouble. But then I saw that this new one wasn't a surface mount, which screws straight to the fiberglass with only one small hole for the wiring to come through. The one I just received has a 'surface mount' trim ring, which fastens to the fiberglass siding, but the rest of the light is recessed 5/8" under the fiberglass surface(???). The one I installed last year was a flat backed, surface mount light. I went ahead and cut a 7" diameter hole inside the diameter of the old light. What a pain in the neck! And the aluminum frame sitting behind the luan board siding (under the fiberglass), was less than 5/8 deep, so I had to bang that with a hammer to make it work. This is NOT what is advertised, and absolutely not what I received last year. I know, I should have returned it, but the 5er is 30 miles away at a property we own, and when I have a project started, I want to finish it, not wait a week or two, so I made a quick decision to just make it work. What a mistake that was. I am not happy at all with the light. And to make things worse, I went around to the back side of the trailer to check how the other light went in, wondering why the first one was correct (flat mounted, not recessed), and it has about an inch and a half of water inside of it. What a waste of time and money!

J
JOHN C.
Work great

Light works great. Nice and bright.

K
KGOOD
Great LED replacement.

Replaced both of the old lights on our 2002 Newmar Kountry Star. These look great and give a good amount of light. Enough for security lighting at any site we may need it.

N
Nancy K.
Fits great

Both of my outside lights needed replaced!

T
Ted
Great light

Works as it should bought it to replace the burnt out one

R
Rick N.
Perfect fit.

Perfect fit for my 2004 Newmar. Identical to the originals. Old lenses were badly yellowed.

M
Mauro P.
Fits perfectly

Ease to install, right replacement

T
Ted H.
quality seems good.

Fits as it should with a good price

P
Paul H.
RV SCARE LIGHT

Light was perfect but not as bright as I would have liked.

j
joey w.s.
New light

Mount right up and works well

K
Kindle C.
Worked well

Old one was leaking around the seal and of course you can't just buy the seal, so I replaced everything as the old one had rust on it from the leak. Easy to install and works as expected.